Specify the line lead, deck footprint and backing before selecting a cleat. This range includes Round Bar Boat Cleat L1002, Trimline Boat Cleat L1003. Compare the referenced forms by the actual mounting and connection requirements. Confirm the selected drawing, material and complete supply scope with Foundry Queen before ordering.
The L1002 reference is a round-bar cleat with two mounting feet and a raised bar. Four listed lengths run from 200 to 380 mm. Select the footprint, rope clearance and backing arrangement together; the listed component mass is not a mooring load rating. Reference lengths: 200, 250, 300 and 380 mm. Reference component masses: 0.653, 1.008, 1.947 and 3.003 kg respectively. Mounting: Two feet; confirm fixing centres and backing. Confirm the selected drawing, material and complete supply scope with Foundry Queen. The detail page keeps the referenced configuration and enquiry requirements together.
The L1003 family has a slim, flattened upper bar above an open two-foot base. The 100 and 150 references have matching length entries. The source row for L1003-200 instead lists 300 mm, so that dimension must be resolved against a drawing before ordering. Confirmed reference lengths: L1003-100: 100 mm; L1003-150: 150 mm. Reference component masses: 0.068 and 0.324 kg respectively. Unresolved row: L1003-200 has a conflicting 300 mm length entry; confirm drawing. Profile: Flattened bar with an open two-foot base. Confirm the selected drawing, material and complete supply scope with Foundry Queen. The detail page keeps the referenced configuration and enquiry requirements together.
Specify the line lead, deck footprint and backing before selecting a cleat. This range includes Round Bar Boat Cleat L1002, Trimline Boat Cleat L1003. Compare the referenced forms by the actual mounting and connection requirements. Confirm the selected drawing, material and complete supply scope with Foundry Queen before ordering. Give each item a model reference and installation position, then add quantity, drawing revision, dimensions, material and finish. Include photographs that show the complete existing arrangement when replacing a part. Mark any unresolved interface or catalogue discrepancy clearly. Foundry Queen can use this schedule to organise the enquiry and identify the details that need confirmation for the proposed supply. Keep the accepted drawings, accessory list and quotation together so that purchasing, receipt and installation refer to the same agreed configuration.
Specify the line lead, deck footprint and backing before selecting a cleat. This range includes Round Bar Boat Cleat L1002, Trimline Boat Cleat L1003. Compare the referenced forms by the actual mounting and connection requirements. Confirm the selected drawing, material and complete supply scope with Foundry Queen before ordering.
A cleat gives a line a controlled route around a raised bar or horns. The position of the feet, the space beneath the bar and the end shape affect how a rope can be led and secured. Choose the component together with the proposed line arrangement. A catalogue length alone does not show whether a line will rub against neighbouring equipment or whether a hand can reach the fixing area. Compare the complete outline and the actual deck location before settling on a size.
L1002 uses a round bar supported above two mounting feet. The reference lengths are 200, 250, 300 and 380 mm. Corresponding catalogue component masses are 0.653, 1.008, 1.947 and 3.003 kg. These figures help identify the listed versions and should remain paired with their drawings. They are not mooring loads. A larger listed mass does not establish a stronger complete installation because the supporting structure, fasteners and force direction also form part of the connection.
The L1003 illustrated form differs from the round bar cleat. Compare its base, projection and space around the line path using the selected version drawing. One reference table associates L1003-200 with a length of 300 mm. That conflicting entry needs confirmation, so an enquiry should identify both the printed code and the intended measured length. Do not silently assume that the model suffix fixes the overall size. Keep the accepted drawing with the purchase schedule to prevent two different versions being treated as equivalent.
Inspect the actual supporting surface before specifying the fitting. Record its thickness, condition, curvature and available access from the reverse side. Identify any backing, reinforcement or fastener arrangement that belongs to the complete installation. The catalogue component does not describe the strength of the structure beneath it. For replacement work, compare the existing hole pattern with the proposed drawing and identify any previous damage or modification. Agree the mounting preparation before machining, drilling or cutting the surface. Keep the accepted installation details with the model schedule.
State the required material specification and finish in the enquiry. The source product names and photographs do not establish a particular stainless steel grade for every version, so the quotation must confirm the actual offered alloy. A mirror-like surface is a visual finish and does not identify material chemistry. Consider the intended environment, adjacent materials, cleaning requirements and any required documentation. Ask for evidence that relates to the proposed supply rather than treating a broad marine label as proof of corrosion resistance or suitability for every exposure condition.
Use a dimensioned drawing to establish the interfaces that control assembly. Overall length, fixing centres, opening size, thread designation and insertion depth describe different features and should not be mixed. State the units and identify the version associated with each dimension. Where a catalogue table contains an inconsistent model code or value, resolve it with the supplier before ordering. Check mating parts as a complete connection, including seals, pins, screws, hoses or tubes where relevant. A matching nominal dimension alone does not confirm that two parts fit together.
List the components required for each installation position. State whether the enquiry is for a fitting body alone or an assembly with fasteners, covers, seals and other accessories. Photographs may show components used to illustrate the application without defining what is included. Confirm quantities per assembly as well as the total order quantity. Record any requested inspection documents, marking, packaging and destination requirements with the quotation. These details allow the delivered parts to be checked against an agreed schedule instead of an informal product description.
Keep dimensional catalogue information separate from verified performance evidence. Component mass, nominal size and material appearance are not load ratings. Where the application requires a working load, sealing capability or other performance characteristic, identify the requirement and ask for relevant documentation for the exact offered configuration. Review the supporting structure and connected equipment as part of the installation. Do not extend a claim from one model, material or assembly to another without evidence. Seek appropriate technical review for the intended marine use before relying on an unverified catalogue comparison.
Give each item a model reference and installation position, then add quantity, drawing revision, dimensions, material and finish. Include photographs that show the complete existing arrangement when replacing a part. Mark any unresolved interface or catalogue discrepancy clearly. Foundry Queen can use this schedule to organise the enquiry and identify the details that need confirmation for the proposed supply. Keep the accepted drawings, accessory list and quotation together so that purchasing, receipt and installation refer to the same agreed configuration.
Send Foundry Queen your model schedule and drawings. Include the intended service, installation position, quantities and the interfaces still requiring confirmation. The accepted drawing and agreed supply details should determine the final order.