Curved Base Glass Holder L6015-H is a stainless steel fitting for a defined glass connection. The D-shaped body has a curved rear contact profile for a matching supporting member. Check that curved interface against the post geometry and fixing access on the selected drawing. The source specification lists 8–12 mm glass with matching inserts and a reference weight of 0.24 kg. Foundry Queen enquiries should include the glass build-up, panel dimensions and intended supporting or adjacent panel arrangement. Select the material grade and finish separately from the mechanical interface. The contact inserts, fixing and glass engagement should be confirmed together on the approved drawing. Send a layout and quantity schedule so that the proposed configuration can be reviewed before ordering.
Curved Base Glass Holder L6015-H is a stainless steel fitting for a defined glass connection. The D-shaped body has a curved rear contact profile for a matching supporting member. Check that curved interface against the post geometry and fixing access on the selected drawing. The source specification lists 8–12 mm glass with matching inserts and a reference weight of 0.24 kg. Foundry Queen enquiries should include the glass build-up, panel dimensions and intended supporting or adjacent panel arrangement. Select the material grade and finish separately from the mechanical interface. The contact inserts, fixing and glass engagement should be confirmed together on the approved drawing. Send a layout and quantity schedule so that the proposed configuration can be reviewed before ordering.
Product | Curved Base Glass Holder L6015-H |
Reference configuration | L6015-H |
Glass thickness | 8–12 mm; confirm matching inserts for the selected version |
Reference weight | 0.24 kg; subject to final configuration |
Connection geometry | The D-shaped body has a curved rear contact profile for a matching supporting member. Check that curved interface against the post geometry and fixing access on the selected drawing. |
Material options | 304, 316, 316L or duplex 2205 stainless steel; subject to order confirmation |
Finish options | Mirror, satin, matte black, gold or white; confirm availability |
Project review | Confirm drawings, glass engagement, contact inserts and fixing arrangement |
Brand | Foundry Queen |
The D-shaped body has a curved rear contact profile for a matching supporting member. Check that curved interface against the post geometry and fixing access on the selected drawing.
Compare the panel layout with the selected fitting drawing. Confirm the 8–12 mm glass range, matching inserts and required clearances for the version offered. The contact arrangement and installation access are part of the selection; the product photograph is a reference view, not an installation instruction.
Provide the product reference, glass specification, quantity, material grade, finish and delivery destination. Ask for confirmation of the drawing revision and any agreed inspection documents. The source lists a reference weight of 0.24 kg, which should be checked against the final configuration. Do not infer a system load rating, certification or warranty from the appearance of the fitting.
Compare this fitting with the related glass hardware below. The D-shaped body has a curved rear contact profile for a matching supporting member. Check that curved interface against the post geometry and fixing access on the selected drawing. Foundry Queen enquiries can include a panel layout, quantities, material and finish requirements. Check which interfaces differ before treating two product names as alternatives. Confirm the selected configuration against the drawing offered for the order.
