L1013 thru-hull outlet fittings have a flanged face, threaded neck and retaining nut in the reference imagery. Nominal sizes run from 1/2 to 1-1/2 inches. Review thread form, usable neck length, hull thickness and the connected pipe or valve arrangement together. Foundry Queen enquiries should identify the selected reference, mounting layout, required quantity and intended service. Review dimensions, material specification, surface finish and supplied accessories as separate parts of the order. Confirm the exact component drawing and the interfaces with adjacent hardware before preparing the mounting surface. Product photographs describe the illustrated form; they do not establish a certified working load, sealing performance or suitability for every marine installation. Any required inspection documents or application approvals should be agreed for the actual proposed supply.
L1013 thru-hull outlet fittings have a flanged face, threaded neck and retaining nut in the reference imagery. Nominal sizes run from 1/2 to 1-1/2 inches. Review thread form, usable neck length, hull thickness and the connected pipe or valve arrangement together. Foundry Queen enquiries should identify the selected reference, mounting layout, required quantity and intended service. Review dimensions, material specification, surface finish and supplied accessories as separate parts of the order. Confirm the exact component drawing and the interfaces with adjacent hardware before preparing the mounting surface. Product photographs describe the illustrated form; they do not establish a certified working load, sealing performance or suitability for every marine installation. Any required inspection documents or application approvals should be agreed for the actual proposed supply.
L1013 thru-hull outlet fittings have a flanged face, threaded neck and retaining nut in the reference imagery. Nominal sizes run from 1/2 to 1-1/2 inches. Review thread form, usable neck length, hull thickness and the connected pipe or valve arrangement together.
Keep the model reference with the installation position on the project schedule. Check fixing access, neighbouring parts and the dimensions that control assembly. When replacing existing hardware, provide measured interfaces and photographs of the complete arrangement, rather than relying on a catalogue name alone. Confirm unresolved entries against the selected drawing before the order is agreed.
Send Foundry Queen the model schedule and installation layout for a product-specific enquiry.
Product | Thru Hull Outlet Fittings L1013 |
Reference | L1013 |
Reference family | L1013-01 through L1013-05 |
Nominal size options | 1/2, 3/4, 1, 1-1/4 and 1-1/2 inches |
Reference component masses | 0.171, 0.282, 0.378, 0.625 and 0.760 kg respectively |
Connection | Confirm thread standard, nut, sealing interface and usable neck length |
Material and finish | Confirm the specified alloy, treatment and documentation for the selected version |
Supply scope | Confirm hardware, fasteners, seals and accessories where applicable |
Brand | Foundry Queen |
L1013 thru-hull outlet fittings have a flanged face, threaded neck and retaining nut in the reference imagery. Nominal sizes run from 1/2 to 1-1/2 inches. Review thread form, usable neck length, hull thickness and the connected pipe or valve arrangement together.
Compare the selected drawing with the actual mounting surface and adjacent components. Identify the fixing positions, access for assembly and any required backing or sealing arrangement. Material selection and surface appearance should be confirmed independently of the nominal model size. Do not treat a component mass or a catalogue photograph as an installation rating.
State the reference, required quantity, agreed dimensions, material and finish. Add the destination, supplied-accessory requirements and any inspection documents needed for the proposed use. For replacement work, include measurements and photographs that show the whole connection. Resolve inconsistent source entries before ordering and keep the accepted drawing with the quotation.
L1013 thru-hull outlet fittings have a flanged face, threaded neck and retaining nut in the reference imagery. Nominal sizes run from 1/2 to 1-1/2 inches. Review thread form, usable neck length, hull thickness and the connected pipe or valve arrangement together. Compare related marine fittings by the actual installation interface and model drawing. Foundry Queen can organise a clear product enquiry from the required reference, quantity, dimensions and material schedule. Confirm the complete supply scope before preparing the mounting surface.
