Hydraulic door closer hinges combine a hinge arrangement with a controlled closing function. Compare EAM2, EAM5, EAM9 and EAM10 by the complete hinge set, door weight and dimensions, handing, mounting preparation and latching option. Confirm the selected version against the actual opening before ordering.
EAM2 combines a conventional leaf-hinge mounting format with hydraulic closing. The 40, 60 and 80 kg versions require different spring-and-hydraulic hinge sets, and left/right handing is part of the model reference. Reference load bands: 40, 60 or 80 kg; matching hinge-set configuration required. Door envelope: 40 kg: ≤800 × 2000 mm; 60 kg: ≤900 × 2200 mm; 80 kg: ≤1200 × 2400 mm. Check the selected dimensions, mounting drawing and complete supply scope with Foundry Queen before preparing the opening. The detail page keeps the configuration options and enquiry requirements together.
EAM5 has 50, 70 and 90 kg reference variants. The heavier version uses an additional spring hinge, so selecting a single hinge by appearance would miss an essential part of the specified assembly. Reference load bands: 50, 70 or 90 kg with the specified hinge set. Door envelope: 50 kg: ≤800 × 2000 mm; 70 kg: ≤900 × 2200 mm; 90 kg: ≤1000 × 2400 mm. Check the selected dimensions, mounting drawing and complete supply scope with Foundry Queen before preparing the opening. The detail page keeps the configuration options and enquiry requirements together.
EAM9 places the closing function in a concealed hinge arrangement. The 30, 60 and 80 kg variants differ in both the number of hydraulic elements and the permitted door envelope. Configuration: 30 kg: one hydraulic plus one empty hinge; 60 kg: two hydraulic; 80 kg: two hydraulic plus one empty. Door envelope: 30 kg: ≤800 × 2000 mm; 60 kg: ≤950 × 2400 mm; 80 kg: ≤1000 × 2800 mm. Check the selected dimensions, mounting drawing and complete supply scope with Foundry Queen before preparing the opening. The detail page keeps the configuration options and enquiry requirements together.
EAM10 is a jamb-mounted hydraulic hinge with an offset body. Its reference information lists a 115-degree maximum opening and hold-open or non-hold-open choices, which must be matched to the opening layout. Reference load options: 40, 60, 80 or 100 kg; confirm the complete hinge configuration. Door width: 800–1200 mm reference range. Check the selected dimensions, mounting drawing and complete supply scope with Foundry Queen before preparing the opening. The detail page keeps the configuration options and enquiry requirements together.
Hydraulic door closer hinges combine a hinge arrangement with a controlled closing function. Compare EAM2, EAM5, EAM9 and EAM10 by the complete hinge set, door weight and dimensions, handing, mounting preparation and latching option. Confirm the selected version against the actual opening before ordering. Give each opening a door reference and record its material, weight, width, height, thickness and handing. Add the required finish, hinge-set quantity, latching choice and any hold-open requirement. A marked-up plan is more useful than an isolated hinge photograph when several similar doors open in different directions. Confirm whether the order includes fixings and accessories or only the hinge bodies. Keep the final model schedule with the quotation so that the agreed assembly can be checked on receipt without relying on a broad family name.
Hydraulic door closer hinges combine a hinge arrangement with a controlled closing function. Compare EAM2, EAM5, EAM9 and EAM10 by the complete hinge set, door weight and dimensions, handing, mounting preparation and latching option. Confirm the selected version against the actual opening before ordering.
A hydraulic hinge is part of the door support and closing arrangement. Begin with the axis position and mounting geometry rather than the decorative finish. A leaf hinge fixes across the door and frame faces, while a concealed design needs a coordinated pocket and articulation clearance. A jamb-mounted offset body presents another interface. These forms cannot be exchanged merely because their reference weight bands overlap. Check the complete open and closed positions on the drawing, including the handle projection and the clearance to a neighbouring wall.
The EAM2 and EAM5 references use different combinations of spring and hydraulic hinges for different door bands. The additional spring unit listed for a heavier version is part of the configuration, rather than a spare fitting. An enquiry should state whether the request concerns an individual replacement hinge or the complete operating set. Identify the existing holes, leaf dimensions and hinge centres when retrofitting. Confirm the selected load band and assembly before preparing any recesses or assuming that a photograph shows every supplied component.
EAM9 changes both the visible appearance and the door preparation. Its reference configurations distinguish a hydraulic element from an empty hinge, and the number of each changes with the specified version. The minimum reference door thickness is important because the mounting pocket must leave suitable material around the fixing positions. Check door construction as well as nominal thickness: a hollow or internally reinforced leaf may need a different preparation assessment from solid timber. Coordinate the pocket depth, screw length and frame rebate using the approved model drawing.
The EAM10 reference describes a jamb-mounted hydraulic hinge with an offset form and optional hold-open behaviour. Review the opening arc and the space occupied by the mechanism at intermediate angles, not only at its end positions. Confirm that seals, architraves and nearby finishes do not obstruct movement. The published maximum opening is a reference for the selected version and should not be used as a substitute for a complete installation drawing. Ask for the actual mounting and adjustment instructions with the quotation.
Closing and final latching are related but distinct parts of the operating cycle. A buyer should identify whether a latch is present and whether the selected hinge version includes additional latching force. Seal compression, latch resistance and door alignment can affect the behaviour of the whole assembly. Do not compensate for an unsuitable mounting layout by assuming the closing adjustment will resolve every problem. Agree the intended behaviour, check the supplied instructions and review the completed door after installation. A generic demonstration does not establish performance for a different opening.
Give each opening a door reference and record its material, weight, width, height, thickness and handing. Add the required finish, hinge-set quantity, latching choice and any hold-open requirement. A marked-up plan is more useful than an isolated hinge photograph when several similar doors open in different directions. Confirm whether the order includes fixings and accessories or only the hinge bodies. Keep the final model schedule with the quotation so that the agreed assembly can be checked on receipt without relying on a broad family name.
Give Foundry Queen the exact product reference and a clear door schedule. Include measured dimensions, construction, weight, opening direction and the surrounding mounting detail. State the quantity and desired finish separately from the functional requirements. If a product is intended to replace an existing fitting, provide the fixing centres, recess dimensions and photographs of the complete arrangement. Identify which accessories are required and ask for the selected drawing before preparing the door or frame. A family name or nominal capacity is not enough to confirm the correct assembly.
Compare the proposed hinge set against the actual opening and retain the approved configuration with the quotation. Confirm the supply scope, packaging requirements and destination before the order is finalised. Product photographs illustrate the referenced form; final dimensions and supplied options must match the agreed documents. Contact Foundry Queen with your layout and product schedule so that unresolved interfaces can be identified before fabrication.
Hydraulic door closer hinges combine a hinge interface with a defined closing arrangement. The listed EAM references use different forms and installation requirements. Select by the actual door preparation and complete hinge-set configuration rather than a similar outline or a single headline capacity.
A useful hydraulic door closer hinges enquiry identifies the selected item, its installation or manufacturing context, and the features that must match adjacent parts. Record units and drawing revisions. Where several variants are required, give each one a separate schedule line so that a quotation cannot silently substitute a different configuration.
Check the exact offered model documents and full set composition. Reference capacities must remain tied to the relevant configuration and cannot be extended to a different hinge set or door arrangement.
When comparing a hydraulic door closer hinges manufacturer, ask how the proposed item will be made and which features will be verified before dispatch. Review evidence for the actual product and order, including any subcontracted operations that affect the agreed supply. A supplier should identify exactly what the quotation includes, what remains open for confirmation and which documents will accompany the goods. Discuss these points with Foundry Queen against the selected drawing and item schedule.
Request relevant factory information for the proposed production route rather than relying on unrelated workshop photographs or general capacity statements. Agree the critical features, inspection method, sampling scope and required records before approval. Keep material identification separate from surface appearance. If a sample or trial is part of the order, define what will be examined, which drawing revision applies and how discrepancies will be resolved before repeat production.
The hydraulic door closer hinges price depends on hinge mechanism, matched set contents, finish, machining and number of door sets. Compare quotations on the same drawing revision and supplied condition. Separate one-time tooling or setup charges from recurring component costs, and identify any optional items independently. A lower unit figure is not a complete comparison when machining, accessories, inspection, packaging or transport responsibilities differ. Ask for a written quotation stating the currency, quantity basis, validity and delivery terms; no fixed price is implied by this guide.
For an overseas order, ask the exporter to confirm destination requirements, package identification and the agreed delivery terms. Specify protection for the functional surfaces and interfaces listed in the product schedule. Keep different references identifiable after unpacking. Confirm which commercial and technical documents belong to the shipment and how any split deliveries will be recorded. Export packing should be defined for the actual parts and transport route rather than assumed from a catalogue image.
Follow the relevant category or product below and keep its reference with the enquiry. Compare the actual connection and supplied contents; these links identify different options rather than equivalent replacements.
Contact Foundry Queen with the drawing or selected reference, quantities, required material and finish, the delivery destination and any open technical points. Attach the acceptance requirements and the required supply scope. Retain the agreed quotation, drawings and inspection schedule together so that purchasing, receipt and later repeat orders refer to the same defined product.